Min. Shipping :£0.00
VAT (20%): £0.00
Total: £0.00
Prices in currencies other than GBP are for guidance only. The actual rate will be that used by the credit card company at the time of billing.
Accessories for vintage and classic lamps. Rim catches, springs, catch plates and retaining screws for Lucas and Butler headlamps. Screws for Lucas type 1130 sidelamps as well as ST51 and ST38 rear lamps. Dipping reflector parts. 'W' wires of different designs, that hold the glass lens firmly in place inside the rim of head and sidelamps.
Knurled and slotted headlamp rim screw for Lucas L140, L150 etc. type headlamps. Overall length 33mm (head 9mm, thread length 24mm), head diameter 10mm. 2BA thread. Chrome plated brass. Offered as...
Hiqh quality clamp for tightening the bulb holder socket in the back of Lucas lamp refectors onto BA15 bulb holders (e.g. our part numbers 853 or 153). The clip strap is formed from steel and...
Chromium plated rim catch, for Lucas type head lamps, short style, overall dimensions 31mm long x 27mm wide, equivalent to original Lucas part number 509936. Use with 'spectacle' wire spring clip...
Spring (spectacle shape) for rims that use short rim catch clip (our 863B), equivaent to Lucas part number 509191
Chrome on bronze rim catch for Lucas head lamps, long type, overall dimensions 45mm long x 26mm wide. Makes Lucas assembly part no. 532590 with compression spring - part number 864A - and a small...
Compression spring for use with long rim catch part no. 863A. The spring is held in place by a small roll pin inserted through the end of the catch). Makes Lucas part no assembly 532590
Chrome plated bronze bracket for Lucas type headlamps such as the L140. Fits through a slot in the headlamp rim, and the base of the daisy headed rim fixing screw (part number 641) locates in the...
Chome plated bronze bracket for Lucas type headlamps such as the L140. Fits inside the headlamp shell rim - the tongue fits through the slot which then accepts the rim fixing screw 641 in a 2BA...
Daisy head headlamp rim screw for the Lucas L140 & L150 headlamps, overall length 36mm (head 18mm, thread 18mm) head diameter 15mm tapering down to 9mm, with a 2BA thread. Chrome plated brass.
Long daisy head head and spot lamp rim screw for some large Lucas headlamps including the P80, overall length 49mm (head 29mm, thread 20mm) head diameter 15mm tapering down to 9mm, with a 2BA...
Silver painted bronze bracket for some Lucas type headlamps. Fits inside headlamp shell, the tongue fits through rim slot which then accepts a rim fixing screw through a plain 5mm diameter hole,...
Silver painted bronze bracket. Fits inside headlamp rim, tongue fits through rim slot which then accepts rim fixing screw. Dimensions 36mm x 18mm, screw tongue 17mm wide x 15mm tall with 5mm slot.
Silver painted bronze bracket. Fits inside headlamp rim, the tongue fits through the rim slot which then accepts rim fixing screw. Dimensions 36mm x 13mm, screw tongue 17mm wide x 13mm tall with...
Stainless steel headlamp rim retaining screw, for use with E1ADKN-13050
Used in Butler type lamps - stainless steel. Use with E1ADKN-13047
Butler type headlamp screw/stud and catch barrel/boss.
Return spring for dipping reflectors used on Lucas lamps including the L150. Extension spring. 48mm long, 6.25mm diameter with one closed loop end and one open loop end. Please check dimensions...
Dipping reflector pivot used on Lucas two piece dipping reflectors. Spring steel 'P' clip and ball bearing holds inner refector bowl and outer reflector rim togther, allowing the inner reflector...
Top rim stainless steel retaining screw for 297 (Lucas 1130 type) sidelamp lenses - use to retain lens part numbers 681 (glass with chrome surround) and 361C/361A (clear or amber moulded plastic).
Chrome on brass fixing nut for original Lucas ST38 'Pork Pie' type lamps with 4BA thread.
Chrome on brass fixing nut for reproduction 776/CA1249 part number series lamps (reproduction Lucas ST38/'Pork Pie' type lamps) with M4 fixing stud thread.
Chrome on brass rim fixing nut with 2BA thread. 10mm depth of female thread. Supplied with 2BA x 3/4" slotted cheese head stainless steel screw, to pull lamp body and rims togther through a bracket.
Stainless steel lamp housing retaining screw - 4BA thread x 16mm long. Slotted and knurled head, 8mm diameter. Used on D lamps to secure the lamp housing to the back plate.
Lamp glass clip. 'W' wire clip to hold the glass into a headlamp rim - approx 36mm long. Most rims about 8" diameter use four.
Lamp glass clip. Large 'W' wire spring clip for holding glass lenses into headlamp rims. Approx 48mm long side with a slight curve. Useful for deep headlamp rims. Most headlamp rims use four.
Lamp glass clips. Large 'W' wire for holding glass lenses into headlamp rims, approx 54mm long side. This clip can be used for other applications but is actually made for P100 R & S type lamps.
Lamp glass clips. Small 'W' wire clip for holding lenses into rims in sidelamps. Approximately 22mm long, sold as a packet of 6 pieces
Lens retaining wire for 249/428 part number series (equivalent to Lucas type ST51 type) 'D' lamps